Make sure this part fits

GM 19122437
C.V. Joint, Outer

1995-2009 GM

Customer Questions & Expert Answers (9)
GM 19122437 C.V. Joint, Outer
  • Part Description
    Outer CV Joint; CV Joint
  • Position
    Outer
  • Replaces
    26044410, 26045070
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    1995-2005 Buick CenturyCustom, Limited, Special, Special Edition4 Cyl 2.2 L GAS, 6 Cyl 3.1 L GAS
    2005-2009 Buick LaCrosseCX, CXL6 Cyl 3.8 L GAS
    1995-2005 Buick LeSabreCustom, Limited6 Cyl 3.8 L GAS
    2006-2008 Buick LucerneCX, CXL6 Cyl 3.8 L GAS
    1999-2004 Buick RegalGS, GSE, LS, LSE6 Cyl 3.8 L GAS
    1995 Cadillac DeVilleBase8 Cyl 4.9 L GAS
    2000-2005 Chevrolet ImpalaBase, LS, LS Sport, Police, SS6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
    1995-1996 Chevrolet Lumina APVBase, LS6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
    2000-2005 Chevrolet Monte CarloLS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
    1997-2005 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19122437 designed for my car? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 19122437 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    What is the procedure for tightening the bolts for the 2000 Buick LeSabre? Posted by Customer
    A:
    Tighten the bolts by hand until snug, then alternate tightening each bolt 180 degrees at a time using a ratchet wrench.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Joint
    Q:
    What is the cleaning process for the CV joint components for the 2000 Buick Century? Posted by Customer
    A:
    Clean the inner and outer race assemblies, the CV joint cage, and the chrome alloy balls thoroughly with cleaning solvent, then dry all parts and check for unusual wear, cracks, or damage.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Joint
    Q:
    What tools are required for servicing and repairing the constant velocity joint boot for the 2007 Buick LaCrosse? Posted by Customer
    A:
    J 41048 Drive Axle Swage Ring Clamp, J 8059 Snap Ring Pliers, and J 35910 Drive Axle Seal Clamp Pliers.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Joint
    Q:
    What is the first step in the process for the 2007 Buick Lucerne? Posted by Customer
    A:
    Inspect the transmission sealing surface for corrosion and clean it with 320 grit cloth if necessary.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Joint
    Q:
    What is the final step in the assembly process for the 2000 Buick Regal? Posted by Customer
    A:
    Align the inboard boot, housing, and large boot retaining clamp, crimp the clamp with the Seal Clamp Tool (J 35910) to 174 Nm (130 lbs.), and check the gap dimension on the clamp ear.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Joint
    Q:
    How should the Small Swage Tool be used for the 2000 Chevrolet Impala? Posted by Customer
    A:
    Mount the Small Swage Tool (J 41048) in a vise and align the outboard end of the halfshaft assembly in the tool, ensuring the boot neck is correctly positioned.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Joint
    Q:
    What should be done to the halfshaft bar after removing the spider assembly for the 2000 Chevrolet Monte Carlo? Posted by Customer
    A:
    Clean the halfshaft bar with a wire brush and inspect the spider assembly for wear, replacing any damaged parts.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Joint
    Q:
    What is the first step in the replacement process for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Remove the large boot retaining clamp from the CV joint with a side cutter and discard it, then do the same for the small boot retaining clamp on the halfshaft bar.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Joint
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM C.V. Joint, Outer 19122437 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19122437 C.V. Joint, Outer is available in the market under the name GM CV Joint. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19122437 C.V. Joint, Outer fits certain Chevrolet Impala, Monte Carlo, Venture models, as well as Cadillac DeVille. Additionally, it is compatible with Buick Regal, LaCrosse, LeSabre and Pontiac Grand Prix, Bonneville, Montana models.
The original GM component designated by Manufacturer Part Number 19122437 maintains top performance when functioning as the Outer CV Joint; CV Joint unit at its Outer. The component 19122437 is constructed from durable material and its dimensions span 7.6 x 7.2 x 6.5 inches while weighing 6.50 Pounds. The component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of CV Joints; Outer Joint; Outer Joint Assembly. The part 19122437 has available replacement options 26044410, 26045070. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.