Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 88938356
Cup Holder

2001-2007 GM

Customer Questions & Expert Answers (20)
GM 88938356 Cup Holder
  • Part Description
    Holder, Seat Belt
  • Position
    Front Center
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • 88938356 Cup Holder is Ref No. 8 in the diagram below

    2006 Cadillac Escalade EXT Cup Holder Diagram for 88938356
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 88938356

  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    2001-2007 Chevrolet Silverado 1500Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2001-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    2001-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is 88938356 compatible with my car? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 88938356 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    How do you remove the cupholder assembly for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Use a flat bladed tool to pry between the console and the cupholder assembly, releasing the clips to remove the cupholder assembly.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Cup Holder
    Q:
    What should you ensure after installing the cupholder for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Inspect for correct operation.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Cup Holder
    Q:
    What is the first step for installation of the new cupholder for the 2006 Cadillac Escalade EXT? Posted by Customer
    A:
    Position the cupholder assembly over the console and connect the wire connector.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Cup Holder
    Q:
    How do you replace the rear cupholder for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    First lower the cupholder, then insert a flat bladed tool between the cupholder hinge and the end panel to pry off the cupholder from the console.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Cup Holder
    Q:
    What is the installation process for the new cupholder for the 2006 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Place one of the hinges in the opening in the panel and swing the cupholder assembly to install the other hinge in the opposite opening.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Cup Holder
    Q:
    How do you replace the rear cupholder for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    First, lower the cupholder, then insert a flat bladed tool between the cupholder hinge and the end panel to pry off the cupholder from the console.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Cup Holder
    Q:
    How do you replace the rear cup holder in the front floor console for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    First, lower the cupholder.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Cup Holder
    Q:
    What is the installation process for the new cupholder for the 2006 Chevrolet Tahoe? Posted by Customer
    A:
    Place one of the hinges in the opening in the panel and swing the cupholder assembly to install the other hinge in the opposite opening.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Cup Holder
    Q:
    How do you install the new cupholder for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Place the new cupholder in position and secure it with the rivets at the bottom of the center seat before reinstalling the center seat.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Cup Holder
    Q:
    What is the first step to replace the front seat cupholder for the 2005 Chevrolet Silverado 1500? Posted by Customer
    A:
    First, remove the center seat while ensuring eye protection is worn.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Cup Holder
    Q:
    What screws are used to secure the cupholder during installation for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Install the screws (Part Number: 12345) to secure the cupholder.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Cup Holder
    Q:
    What should be done after removing the center seat for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Take out the rivets that secure the cupholder from the bottom of the center seat and then remove the cupholder itself.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Cup Holder
    Q:
    How do you secure the cupholder during installation for the 2001 Chevrolet Suburban 1500? Posted by Customer
    A:
    Install the screws to secure the cupholder to the IP, tightening them to 2 N.m (18 lb in).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Cup Holder
    Q:
    How do you install the front floor console cup holder (Non-Luxury) for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Push the cupholder inwards until the clips click in place, ensuring that the corners of the cupholder are seated properly.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Cup Holder
    Q:
    What should be done after removing the rivets for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    After removing the rivets, take out the cupholder.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Cup Holder
    Q:
    What should be done after removing the center seat for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Take out the rivets that secure the cupholder from the bottom of the center seat and then remove the cupholder itself.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Cup Holder
    Q:
    How do you install the new cupholder for the 2006 GMC Yukon? Posted by Customer
    A:
    Place the new cupholder in position, secure it with the rivets at the bottom of the center seat, and finally, reinstall the center seat.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Cup Holder
    Q:
    What is the installation process for the new cupholder for the 2006 GMC Sierra 3500? Posted by Customer
    A:
    Place one of the hinges in the opening in the panel and swing the cupholder assembly to install the other hinge in the opposite opening.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Cup Holder
    Q:
    What should you do after installing the screws for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Return the cupholder to the up position.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Cup Holder
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Cup Holder 88938356 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 88938356 Cup Holder is available in the market under the name GM Cup Holder. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 88938356 Cup Holder fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by Manufacturer Part Number 88938356 maintains top performance when functioning as the Holder, Seat Belt unit at its Front Center. The component 88938356 is constructed from durable material and its dimensions span 13.0 x 8.3 x 4.4 inches while weighing 2.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Holder, Seat Cushion. The part 88938356 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.