Make sure this part fits

GM 88956018
Lap & Shoulder Belt

2003-2007 GM

Customer Questions & Expert Answers (16)
GM 88956018 Lap & Shoulder Belt
GM 88956018 Lap & Shoulder Belt
  • Part Description
    Belt Kit, Driver Seat (Retractor Side)
  • Position
    Driver Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2004-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2003-2007 Chevrolet Silverado 1500Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    2003-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 6.0 L GAS
    2003-2007 Chevrolet Silverado 2500 HDBase, LS, LT, LTZ, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007 Chevrolet Silverado 2500 HD ClassicLS, LT, WT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2003-2006 Chevrolet Silverado 3500Base, LS, LT, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 88956018 compatible with my car? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 88956018 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    What should be done if there is any doubt about the condition of the seat belt system for the 2003 Cadillac Escalade? Posted by Customer
    A:
    It should be replaced, including all components used for securing infant carriers, child restraints, and booster seats.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Seat Belt
    Q:
    What should be done after removing the latch assembly for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Remove the center front seat belt buckle bolt and take out the buckle assembly from the seat.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Seat Belt
    Q:
    What should be ensured before replacing the center front seat belt for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Only the specified seat belt components from the GM parts catalog should be used to prevent personal injury.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Seat Belt
    Q:
    What is the next step after installing the buckle assembly for the 2004 Chevrolet Suburban 1500? Posted by Customer
    A:
    Install the seat belt latch assembly to the center front seat and secure it with the latch bolt, also tightening it to 53 N.m (39 lb ft).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Seat Belt
    Q:
    What is the first step in removing the center rear seat belt for the 2005 Chevrolet Silverado 1500? Posted by Customer
    A:
    Remove the seat belt guide cover, the rear seat armrest, and release the J-Clip from under the center armrest.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Seat Belt
    Q:
    Does this replacement requirement apply to child restraints for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Yes, it includes systems used by adults as well as those securing child restraints, infant carriers, and booster seats.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Seat Belt
    Q:
    What is the first step in removing the center rear seat belt for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    Remove the seat belt guide cover, the rear seat armrest, and release the J-Clip from under the center armrest.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Seat Belt
    Q:
    What is the torque specification for tightening the bolt and nut during installation for the 2004 Chevrolet Tahoe? Posted by Customer
    A:
    The bolt to the seat belt anchor should be tightened to 52 N.m (38 lb ft) and the nut to the seat belt retractor to the same torque specification.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Seat Belt
    Q:
    What safety check should be performed after installation for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Verify that the seat belt latch is fully seated in the buckle and retained until purposely released to avoid personal injury.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Seat Belt
    Q:
    What indicators suggest that a seat belt system must be replaced for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    If the words "REPLACE" or "CAUTION" are visible, or if a yellow tag is present, the seat belt system must be replaced.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Seat Belt
    Q:
    What should be done if there is doubt about the condition of a seat belt system for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    It should be replaced, including all related components.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Seat Belt
    Q:
    What components should be replaced in the seat belt system for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    The entire seat belt system, including the buckle, guide, retractor assembly, latch, and webbing material.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Seat Belt
    Q:
    What components need to be removed next for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Remove the nut from the seat belt retractor and the bolt from the seat belt anchor.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Seat Belt
    Q:
    What components need to be removed to begin the replacement process for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Remove the seat belt guide cover, the rear seat armrest, and release the J-Clip from under the center armrest.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Seat Belt
    Q:
    When must a seat belt system be replaced for the 2006 GMC Yukon? Posted by Customer
    A:
    If it was in use during a collision serious enough to deploy automatic restraint devices, such as air bags and seat belt pretensioners.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Seat Belt
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Lap & Shoulder Belt 88956018 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 88956018 Lap & Shoulder Belt is available in the market under the name GM Seat Belt. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 88956018 Lap & Shoulder Belt fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV models.
The original GM component designated by Manufacturer Part Number 88956018 maintains top performance when functioning as the Belt Kit, Driver Seat (Retractor Side) unit at its Driver Side. The component 88956018 is constructed from durable material and its dimensions span 29.7 x 7.3 x 5.7 inches while weighing 3.10 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Belt & Retractor; A95 - Front Bucket Seat; An3 - Front Bucket Seat; Ae7 - Front Split Bench. The part 88956018 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.