Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 26062615
Inner Boot, Front

1998-2013 GM

Customer Questions & Expert Answers (12)
GM 26062615 Inner Boot, Front
GM 26062615 Inner Boot, Front
GM 26062615 Inner Boot, Front
  • Part Description
    Boot Kit, Front Wheel Drive Axle Shaft; CV Boot
  • Position
    Front
  • Manufacturer
    General Motors
Make sure this part fits
$27.79 MSRP: $43.53
You Save: $15.74 (37%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • 1998 GMC Yukon Inner Boot, Front Diagram for 26062615
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 26062615

  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2013, 1999-2000 Cadillac EscaladeBase, Hybrid, Hybrid Platinum, Platinum8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2003-2010 Cadillac Escalade ESVBase, Platinum8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2002-2010 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2007-2010 Chevrolet AvalancheLS, LT, LTZ8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    1998-1999 Chevrolet C1500 SuburbanBase, LS, LT8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    1998-1999 Chevrolet C2500 SuburbanBase, LS8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1998-1999 Chevrolet K1500Cheyenne, LS, Silverado, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    1998-1999 Chevrolet K1500 SuburbanBase, LS, LT8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 26062615 is the right part for my car? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 26062615 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    What should be ensured regarding the convolute retainer for the 2000 Cadillac Escalade? Posted by Customer
    A:
    Ensure the convolute retainer is correctly positioned over the inboard joint boot.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Boot
    Q:
    What should you do with the new swage ring for the 2010 Cadillac Escalade ESV? Posted by Customer
    A:
    Distort the new swage ring into an oval shape and slide it over the boot, ensuring the retaining ring side of the CV joint inner race faces the halfshaft bar before sliding the CV joint onto the halfshaft bar until it clicks into place.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Boot
    Q:
    How should the halfshaft seal cover be positioned for the 2002 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Twist the halfshaft seal cover so that the inboard tab is 180 degrees opposite the outboard tab before positioning the outboard end over the CV joint flat.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Boot
    Q:
    What should be done with the tripot spider assembly for the 2000 Chevrolet K3500? Posted by Customer
    A:
    Handle it with care to avoid separating the tripot balls and needle rollers.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Boot
    Q:
    How tightly should you tighten the seal cover clamp for the 2002 Chevrolet Suburban 1500? Posted by Customer
    A:
    As tightly as possible without deforming the retaining clip, as insufficient tightness can lead to the cover sliding and reduced service life.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Boot
    Q:
    What should you do after sliding the halfshaft seal cover off for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Inspect it for any rips, tears, or damage; if none is found, it can be reused.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Boot
    Q:
    What should be done after tightening the bolts for the 2008 Chevrolet Silverado 1500? Posted by Customer
    A:
    Remove the halfshaft assembly and inspect the inboard stroke position using the specified measurements for each model.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Boot
    Q:
    How do you remove the halfshaft seal cover clamps for the 2002 Chevrolet Tahoe? Posted by Customer
    A:
    Use side cutters to cut the halfshaft seal cover clamps and the nylon strap.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Boot
    Q:
    How do you remove the swage ring for the 2008 GMC Sierra 1500? Posted by Customer
    A:
    Use a hand grinder to cut through the swage ring and then remove the tripot housing from the halfshaft, wiping and thoroughly degreasing it before allowing it to dry.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Boot
    Q:
    How do you remove the halfshaft bar retaining snap ring for the 2010 GMC Yukon? Posted by Customer
    A:
    Locate the halfshaft bar retaining snap ring in the inner race and spread the snap ring ears apart using J-8059 (Snap Ring Pliers).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Boot
    Q:
    What is the procedure for using the Band-it Type Tool for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Rotate the tool toward the clip to bend the band onto it, then pull the tool's cutting handle to remove the excess band.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Boot
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Inner Boot, Front 26062615 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 26062615 Inner Boot, Front is available in the market under the name GM CV Boot. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 26062615 Inner Boot, Front fits certain Chevrolet Tahoe, Avalanche, Silverado 1500 models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by Manufacturer Part Number 26062615 maintains top performance when functioning as the Boot Kit, Front Wheel Drive Axle Shaft; CV Boot unit at its Front. The component 26062615 is constructed from durable material and its dimensions span 6.5 x 6.2 x 5.7 inches while weighing 1.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Boot Kit, Front Axle. The part 26062615 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.